Welcome - Please Read

Welcome. I wanted to provide stripboard layouts I've made to help people new to electronics and even the more experienced get into different aspects of electronics.

I verify the layouts before I post them.

My Facebook Group: www.facebook.com/StripboardLayouts - Please Add For Updates!
My Twitter Thing: @InSonicBloom

Saturday 23 June 2012

Boss FA-1 Stripboard Veroboard Layout


the fabled FET guitar preamp, something I bought for £10 in a bargain bin before it got all famous. I mean it is a good device but some of the crazy prices on eBay that it goes for are just, well - crazy
the reason of course is because 1. famous people use them and 2. they can't be made anymore because the monolithic preamp ICs inside it were discontinued however I have cloned my FA-1 replacing the preamp ICs with 741 ICs and honestly, it sounds exactly the same and you get the same voltages at important test points within the 5% tolerance range set by Boss on their original service manual schematic. and this is because the sound isn't in the IC it's in the circuit! the filter stages and so on. obviously different ICs have different gains and bandwidths but in the case of a guitar effect unless the IC has a significant gain difference you won't hear a difference. which is why I get so annoyed with people who say they have "modified" a guitar effect by changing an op-amp or when they describe a certain op-amp as being "warmer" anyway I won't go into all that crap.

here is the layout and my schematic for the Boss FA-1 - I included my schematic because even though you can readily find the original, it leaves out important information like op-amp inputs, I had to figure out whether connections went to inverting or non-inverting inputs for example.
someone else worked the circuit out using a dual op-amp however he was reluctant to share the schematic for people (there were comments asking but he never posted it and you just have to think - what a dick)

The FET - in both my schematic and layout I used the MPF102 however using this particular FET will add a lot more clipping and if you wish to have a cleaner sound go for the original 2SK246 - however I warn you it has a different PINOUT so you may have to do some leg bending.

VOLUME POT - you need to use a LOG pot not a Linear one

spot the difference


someone on twitter asked me how to add a switching jack so I drew this - I thought I may aswell add it here

6 comments:

  1. Hey, so I just built this and I get a substantially noticeable volume drop. I used all the components described above. Do you have any advice? Thank you!

    ReplyDelete
  2. craaaaaaaaaaap, just read this comment. I'm halfway done soldering all this up. Any updates? Never had any probs with dr paul layouts, but want to make sure before I go any further. gratzi

    ReplyDelete
  3. don't worry, there's nothing wrong with the layout - I've built this one about 8 times for various friends.
    whenever there is a layout posted on this site you can rest assured that I have always built it first :)

    ReplyDelete
  4. Paul, I finally got around to finishing this and it's awesome. I used 2 metal can LM741's and a 2sk30aY for the FET, (had to do some leg twisting). I've been throwing other pedals after it and it really stacks well. Tomorrow I'll try it with some delays, thanks so much!

    ReplyDelete
  5. Thank you for sharing this layout. I thoroughly enjoyed this build and it was a great preamp for my synth. Shout out from Japan!

    ReplyDelete