Welcome - Please Read

Welcome. I wanted to provide stripboard layouts I've made to help people new to electronics and even the more experienced get into different aspects of electronics.

I verify the layouts before I post them.

My Facebook Group: www.facebook.com/StripboardLayouts - Please Add For Updates!
My Twitter Thing: @InSonicBloom

Tuesday 31 March 2015

ADSR Envelope Shaper Stripboard Veroboard Layout


I've been a bit busy recently so I thought I'd scan this interesting looking project in from a magazine from the 70's





3 comments:

  1. Hello Paul, where are the cuts ?.
    Greetings thank you.

    ReplyDelete
  2. Hi - thanks for sharing these scans. I'm planning to put this together but it seems there are some issues with the stripboard layout - inherent in the original article:

    Pin 11 of IC1 is running straight to pin 4 of IC3 (and therefore to ground). Shouldn't there be another cut just before the jumper connecting the ground pins of ICs 3 and 4pin to isolate them from pin 11 of IC1?

    Also there's a cut preventing R8 and R9 connecting to pin 3 of IC5

    And the jumper connecting R10 and the transistor source isn't doing so - seems it needs to be one row shorter

    I wonder if anyone's' had a go at building this? If I'm mistaken please let me know but I'll breadboard it to test.

    Cheers

    ReplyDelete