Welcome - Please Read

Welcome. I wanted to provide stripboard layouts I've made to help people new to electronics and even the more experienced get into different aspects of electronics.

I verify the layouts before I post them.

My Facebook Group: www.facebook.com/StripboardLayouts - Please Add For Updates!
My Twitter Thing: @InSonicBloom

Sunday 20 July 2014

Simple Dual LED Battery Monitor stripboard layout


I got some 3 pin dual LEDs and I thought a good use for them is as little 9v battery status monitors for my guitar pedals. so I came up with this quick circuit that fades from green to red as the battery voltage drops (as shown in the video)

it's a good little mod circuit for any project you want to build that uses a 9 volt battery (or existing stuff you own)




5 comments:

  1. anodes, I understand, but how do I connect the cathode?
    Would have been cool to use in dying battery simulator

    Regards Robin

    ReplyDelete
    Replies
    1. the cathode goes to ground.
      I hadn't come up with this circuit when I did the dying battery simulator. though, I would have probably
      kept it the way it was because you get better resolution with the LM3914

      Delete
  2. good one...
    can u plz help....
    wat would be the changes if i want it for 6v SLA battery
    ..........

    ReplyDelete
  3. This comment has been removed by a blog administrator.

    ReplyDelete
  4. Which resistors should I change to reduce the LED brightness and current consumption?

    ReplyDelete