Welcome - Please Read

Welcome. I wanted to provide stripboard layouts I've made to help people new to electronics and even the more experienced get into different aspects of electronics.

I verify the layouts before I post them.

My Facebook Group: www.facebook.com/StripboardLayouts - Please Add For Updates!
My Twitter Thing: @InSonicBloom

Saturday 24 August 2013

Marshall Bluesbreaker Stripboard Veroboard Layout


There is no schematic for this because I did this one years and years ago and I can't find the schematic that had the right component numbers to it and usually it causes confusion when components don't match their numbers on the schematics.
This particular layout was made from tracing an original unit and some of the component values differ from schematics that are on the net and I assume that they either cloned theirs without removing the components and measuring them and just went by what the component was marked as - this is where people go wrong because some manufacturers mark their components wrong to hinder cloners.

anyway here is the layout


6 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. Did this work? I actually copied it today and I'm having trouble getting it to put any sound out

    ReplyDelete
    Replies
    1. yes - I even recorded a song with this one! https://soundcloud.com/pstevenson/16-there-will-come-soft

      Delete
    2. check resistor 10 - for some reason my editor put it at the end of the list - so you may have used a wrong value due to the stupid program

      Delete
  3. Cool - I didn't have time for a continuity check so I'll start there. Vero got a bit mangled too so I may need to do some surgery, haha. Thanks Paul! I'll check out the song, too!

    ReplyDelete
  4. hi, are all the pots linear? thanks!

    ReplyDelete