I was initially doing this little project for myself and it was based purely on the devils triangle drone I made a couple of years ago - can be found HERE
but this project uses 6 drones and push to make switches so it makes a rudimentary keyboard.
This was totally a personal project but since I planned out the little sections on stripboard before starting I thought I would provide those fragment pieces here
hello again! second question for today...i want to build this one too (and the theremin)...
ReplyDeletei'm just not quite familiar with your way of making boards,labels of the wires etc.... so. i want to ask some things for this one to make sure that i'm in the right way.
from the photo of your build, i'm trying to make sense of what's going on.
i need one buffer, and to "from drones" of the buffer board i'll connect 3 high kai 3 low drone boards right?
and Vin is 9v right?
and what Vref is?how should i wire this?
i understand the mod of replacing the vol pot on devils triangle drone, but here?are those little black switches on/on for the volume mod?
the red pot is for low drone, the green for high. the pot next to buffer?
sorry for the chaotic questions...and my English sucks i know...
this is a fragmented piece - there is a full droner here http://www.paulinthelab.com/2012/10/devils-triangle-drone-synth-stripboard.html
DeleteI really wouldn't recommend trying to make sense of this post cause it's experimental parts of a full project.
this would be a hell of a proyect. im currently building the devils triangle... but an expansive format to it!?!?!?
ReplyDeletein fact i was wondering if i could make a "tuned Potentiometer" out of an old organ pedal keyboard and a trimpot on each key. and maybe achieve a poor mans moog taurus...
thank a lot Paul
there's no reason why not, a pot is a pot; I've got these drones in my guitar!
DeleteHi what does Vref connect to?
ReplyDelete